CMT RCS-STS 3D Router Carver System

Product Description

Turn your router into a remarkable carving tool. Its fast, easy, and a whole lot of fun! Who says that intricate woodcarving requires an artists touch? Thanks to the patented 3D router carver system, anyone with a 12,7mm (1/2) collet plunge router can create any of the beautiful designs shown on these pages in just minutes. Decorate doors, drawers, cabinets, furniture or just about any flat wooden surface with one or more of these designs. How does it work? The secret is in the 3D router carver bit and the way that bit interacts with the carving templates. The V-Groove router bit is enclosed in a 45 cone-shaped guide. You rout with the plunge mechanism of your router unlocked, allowing the bit to move up or down as the router moves forward. As the slot in the template get wider, the bit moves down, producing a wider, deeper V-groove. As the slot gets narrower, the bit moves up, and the groove gets narrower and shallower. It sounds simple, and it is! (thats why the system is patented in the USA and around the world). Please see the illustrations below for more details on the carving technique. Youll receive complete instructions with your 3D carver templates. For an informative visual demonstration, check out the 3D router carver video.What do you need to get started? -The 3D router carver bit. -The Carver template of your choice. -The holding frame to match your template (these are listed in the charts with the templates). -Your 12,7mm (1/2) collet plunge router.Notice: be su

Product Details

• Amazon Sales Rank: #227026 in Home Improvement
• Brand: CMT
• Model: RCS-STS

Features

• The ideal introduction to the world of router carving. You'll get everything you need to make two of the most popular designs: the Classical Cabinet Door and Classical Drawer, plus two Holding Frames, a 3D Carver Router Bit and a DVD.
• The 3D Router Carver System is protected by U.S. Patent No. 5,146,965

CMT 190.506.11 Solid Carbide Up/Downcut Spiral Bit, 1/2-Inch

Product Description

Sharp technology with a new twist! This up/downcut spiral bit is made of a special super-micrograin carbide formula which makes the cutting edges very sharp. The new low-angle spiral is designed to shear wood cleanly and provide excellent chip ejection. As a result, the tool will run cooler and the cutting edges will last longer The spiral bit produces an excellent finish on both the lower and the upper side of your workpiece. Excellent cutting results and enhanced productivity.

Product Details

• Amazon Sales Rank: #89167 in Home Improvement
• Brand: CMT
• Model: 190.506.11
• Dimensions: .50" h x .50" w x 3.00" l, 2.00 pounds

Features

• 1-1/8-Inch Cutting Length, 5/8-Inch Minor Cutting Length, 3-Inch Overall Length
• Premium Quality Solid Carbide Excellent finish on both the workpiece upper/lower side
• 2+2 cutting edges For cutting, copying, sizing and routing wood products, plastic & laminates
• For use on machining centers, point to point machines, CNC routers
• Also for use on hand-held routers equipped with chucks or adaptors

CMT 537.000.07 7 Piece 3/8" Shank Forstner Bit Set

Product Description

We offer a wide range of forstner bits in the most popular diameters. These bits are available individually or in sets. There is a high performance stagger tooth design on all bits for clean sharp holes with straight sides and flat bottoms. These bits are ideal for drill presses, electric and cordless drills in all types of soft woods.

Product Details

• Amazon Sales Rank: #28267 in Home Improvement
• Brand: CMT
• Model: 537.000.07
• Dimensions: 2.00" h x 2.00" w x 6.00" l, 1.00 pounds

Features

• 7-Pieces metric forstner bit set is ideal for drill presses, electric and cordless drills
• Made of super strength alloyed tools steel material
• Used for drilling precise flat bottom holes with no chipping in any softwood thickness
• Set includes 1/4 inches, 3/8 inches, 1/2 inches, 5/8 inches, 3/4 inches, 7/8 inches, 1 inches bits
• Features 3/8 inch shank, alloyed steel tool, 2 cutting edges, 2 scoring knives, right-hand rotation

CMT 529.508.31 Tenon and Plug Cutter 2-Inch

Product Description

Tenon and Plug Cutter 2-InchUsed to make plugs in hard and soft woods.SP SteelLong lasting cutter performanceOverall length 6-5/16-Inch6 teeth

Product Details

• Amazon Sales Rank: #64639 in Home Improvement
• Brand: CMT
• Model: 529.508.31
• Dimensions: 2.00" h x 2.00" w x 6.00" l, 1.00 pounds

Features

• Used to make plugs in hard and soft woods.
• SP Steel
• Long lasting cutter performance
• Overall length 6-5/16-Inch
• 6 teeth

CMT 890.501.11 Horizontal Raised Panel Bit, 1/2-Shank, 3-1/4-Inch Diameter, Carbide-Tipped

Product Description

This bit is great for making classic raised panel doors. We recommend working between 10.000 and 12.000 RPM, from 3 to 5 passes. Equipped with a bearing for easy template work, this tool features super-strength superior steel body, Non-Stick Orange Shield Coating and cutting edges made of SinterHip Hi-Density Industrial Chrome Carbide for a long-lasting performance. After a test performed by Wood Magazine, CMT orange bits have been rated the first overall router bits compared to other brands.

Product Details

• Amazon Sales Rank: #188992 in Home Improvement
• Brand: CMT
• Model: 890.501.11
• Number of items: 1
• Dimensions: 1.00" h x 1.00" w x 2.81" l, 1.00 pounds

Features

• 19/32-Inch Cutting Length, Board Thickness from 19/32 to 23/32-Inch, 2-33/64-Inch Length
• Great for making classic raised panel doors To be used in router tables (3-5 passes)
• Non-Stick Orange Shield Coating, Anti-Kickback Design, Equipped with Bearing
• 2 SinterHip Hi-Density Industrial Chrome Carbide cutting edges for long-lasting performance
• CMT bits were rated the best overall in comparison to other brand (Test by Wood Magazine)

CMT 855.803.11 3-Piece Glass Panel Set in Hardwood Case, 1/2-Inch Shank, Carbide-Tipped

Product Description

This unique CMT rail and stile set allows you to produce glass panel doors using a rubber panel retainer to secure the glass in a 1/8-Inch slot cut into the frames. The included 1/2-shank bits also make a square rabbet on the inside of your door for installing the glass panel. Bits feature super-strength superior steel bodies, Non-Stick Orange Shield Coating and cutting edges made of SinterHip Hi-Density Industrial Chrome Carbide for a long-lasting performance. Not for use on hand-held router. Use them on router table. After a test performed by Wood Magazine, CMT orange bits have been rated the first overall router bits compared to other brands. Included in the hardwood case you will find a Ogee Rail & Stile Set and a 1/8-Inch Slot cutter.

Product Details

• Amazon Sales Rank: #190568 in Home Improvement
• Brand: CMT
• Model: 855.803.11
• Dimensions: 2.00" h x 2.00" w x 6.00" l, 1.00 pounds

Features

• Contains 3 bits: 1-5/8-inch ogee rail and stile bits and a 2-1/8-inch slot cutter
• Use a rubber panel retainer to secure the glass in slot cut into the frames For hand-held routers
• Make a square rabbet on the inside of your door for installing the glass panel
• Non-Stick Orange Shield Coating, Anti-Kickback Design, Equipped with Bearing
• 2 SinterHip Hi-Density Industrial Chrome Carbide cutting edges for long-lasting performance

CMT 854.509.11 Bull Nose Bit, 1/2-Inch Shank, 1/2-Inch Radius, Carbide-Tipped

Product Description

This bit is the perfect choice for making the edges of stair treads, window sills, shelves and more. You can also create an oval edge by using a bit with a bead diameter larger than the stock thickness. This tool features super-strength superior steel body, Non-Stick Orange Shield Coating and cutting edges made of SinterHip Hi-Density Industrial Chrome Carbide for a long-lasting performance. After a test performed by Wood Magazine, CMT orange bits have been rated the first overall router bits compared to other brands.

Product Details

• Amazon Sales Rank: #177049 in Home Improvement
• Brand: CMT
• Model: 854.509.11
• Dimensions: 1.38" h x 1.38" w x 2.88" l, 1.00 pounds

Features

• 1-3/4-Inch Diameter, 1-5/8-Inch Cutting Length, 1-Inch Minor Cutting Length, 3-9/64-Inch Length
• For making the edges of stair treads, window sills, shelves and more
• Create an oval edge by using a bit with a bead diameter larger than the stock thickness
• Non-Stick Orange Shield Coating, Anti-Kickback Design, Equipped with Bearing
• 2 SinterHip Hi-Density Industrial Chrome Carbide cutting edges for long-lasting performance

CMT 838.001.11 3-Piece Roundover 1/4-Inch Shank Router Bit Set

Product Description

These versatile bits are always in demand - the simple clean lines of a smooth roundover edge can be used in a wide variety of applications from picture frames to table and counter tops. CMT as made the Roundover Set to give you the maximum flexibility for all of your projects by putting the most requested diameters in one package. Its hard to find a profile bit that gets more work than a Roundover Bit. This shape is great for simple tasks like easing sharp corners, or for more intricate jobs like drop leaf tables (when used in conjunction with our Cove Bits of the same radius). Always in demand - the simple clean lines of a smooth roundover edge can be used in a wide variety of applications from picture frames to table and counter tops.

Product Details

• Amazon Sales Rank: #100626 in Home Improvement
• Brand: CMT
• Model: 838.001.11
• Dimensions: 2.00" h x 2.00" w x 6.00" l, 1.00 pounds

Features

• Includes 1/4", 3/8" and 1/2" Radius roundovers.
• These versatile bits are always in demand - the simple clean lines of a smooth roundover edge can be used in a wide variety of applications from picture frames to table and counter tops. CMT as made the Roundover Set to give you the maximum flexibility for all of your projects by putting the most requested diameters in one package.
• Anti Kickback Design
• Carbide tipped router bit with anti-kickback design
• These versatile bits are always in demand - the simple clean lines of a smooth roundover edge can be used in a wide variety of applications from picture frames to table and counter tops.

CMT 836.950.11 Chamfer Router Bit 1/2" Shank, 2-9/16" Cutting Diameter, 1" Cutting Length, 45 Degree Cutting Angle

Product Description

This bit cuts clean, accurate bevels and chamfers that are great for edge work or for making perfectly aligned multi-sided containers, boxes and other decorative projects. It can also be used for larger scale projects such as beams and columns with excellent results. Equipped with a bearing for easy template work, this bit features super-strength superior steel body, Non-Stick Orange Shield Coating and cutting edges made of SinterHip Hi-Density Industrial Chrome Carbide for a long-lasting performance. After a test performed by Wood Magazine, CMT orange bits have been rated the first overall router bits compared to other brands.

Product Details

• Amazon Sales Rank: #167906 in Home Improvement
• Brand: CMT
• Model: 836.950.11
• Dimensions: 1.75" h x 1.75" w x 2.63" l, 1.00 pounds

Features

• 45-degree Bevel, 1-Inch Cutting Length, 3-1/32-Inch Overall Length
• Non-Stick Orange Shield Coating, Anti-kickback design, Equipped with a bearing
• Cuts clean bevels and chamfers that are great for edge work
• Also for perfectly aligned multi-sided containers, boxes and other decorative projects
• 2 SinterHip Hi-Density Industrial Chrome Carbide cutting edges for long-lasting performance

CMT 814.501.11 3-Piece Round Nose 1/2-Inch Shank Router Bit Set

Product Details

• Amazon Sales Rank: #344328 in Home Improvement
• Brand: CMT
• Model: 814.501.11
• Dimensions: 2.00" h x 2.00" w x 6.00" l, 1.00 pounds

Features

• Decorate doors, drawer fronts, panels or any flat surface with this 3-piece round nose router bit
• These solid carbide or carbide tipped bits are perfect for sign making, engraving, or adding flutes and veins to doors or drawer fronts
• Set contains three 1/8-Inch, 1/4-Inch, 3/8-Inch cutting radius bits
• Features right-hand rotation and 2 cutting edges
• Measures 1/2-Inch shank
• Decorate doors, drawer fronts, panels or any flat surface with this 3 pieces round nose router bit
• Measures 1/2 inches shank
• Set contains three 1/8 inches, 1/4 inches, 3/8 inches cutting radius bits
• These solid carbide or carbide tipped bits are perfect for sign making, engraving, or adding flutes

CMT 800.517.11 3-Piece Cove Raised Panel Set in Hardwood Case, 1/2-Inch Shank

Product Description

3 useful router bits delivered in a practical hardwood case to have them within reach! This is a more economical solution than purchasing these items separately! These bits feature super-strength superior steel bodies, anti-kickback design to control the depth of cut, Non-Stick Orange Shield Coating and cutting edges made of SinterHip Hi-Density Industrial Chrome Carbide for a long-lasting performance. More features: Silver-copper-silver tri-metal brazing for more endurance and 3 times longer lasting mirror finish obtained by multi-axis grinding. After a test performed by Wood Magazine, CMT orange bits have been rated the best overall router bits in comparison to other brands.

Product Details

• Amazon Sales Rank: #213527 in Home Improvement
• Brand: CMT
• Model: 800.517.11
• Dimensions: 2.00" h x 2.00" w x 4.00" l, 3.00 pounds

Features

• Contains a 3-1/2 cove raised panel bit with backcutter and a pair of 1-3/4 ogee rail & stile bits
• Anti-kickback design, Non-Stick Orange Shield Coating
• 2 SinterHip Hi-Density Industrial Chrome Carbide cutting edges for long-lasting performance
• For cutting plywood, hardwood/softwood on router tables only Not for use on hand-held routers
• CMT bits were rated the best overall in comparison to other brand (Test by Wood Magazine)

CMT 191.507.11 Solid Carbide Upcut Spiral Bit, 1/2-Inch Diameter by 4-Inch Length, 1/2-Inch Shank

Product Description

Sharp technology with a new twist! This upcut spiral bit is made of a special super-micrograin carbide formula which makes the cutting edges very sharp. The new low-angle spiral is designed to shear wood cleanly and provide excellent chip ejection. As a result, the tool will run cooler and the cutting edges will last longer The spiral bit produces an excellent finish on both the lower side of your workpiece. Excellent cutting results and enhanced productivity.

Product Details

• Amazon Sales Rank: #59223 in Home Improvement
• Brand: CMT
• Model: 191.507.11
• Dimensions: .50" h x .50" w x 3.00" l, 2.00 pounds

Features

• 2-Inch Cutting Length, 2 Cutting Edges, Right-Hand Rotation
• Premium Quality Solid Carbide, Excellent finish on the workpiece lower side Upward chip ejection
• For cutting, copying, sizing and routing wood products, plastic & laminates
• For use on machining centers, point to point machines, CNC routers
• Also for use on hand-held routers equipped with chucks or adaptors

CMT 251.042.10 ITK General Purpose Saw Blade, 10-Inch x 42 Teeth 1FTG+2ATB Grind with 5/8-Inch Bore

Product Description

This blade features a thin kerf, which makes it ideal for saws that are a bit underpowered, but at the same time this tool delivers great performance. You will be satisfied with the excellent price/quality ratio. The laser cut heavy-duty blade plate is hardened to allow for great resistance (46-48 Rockwell in hardness) and features expansion slots to reduce noise and anti-vibration design. The teeth are made of micrograin carbide to ensure long-lasting cutting performance and deliver smooth cut on wood and wood products. These are brazed to the blade body through a special trimetallic bond (copper-silver-copper), so that longer cut performance and resistance are guaranteed. Blade is delivered in a unique CMT plastic case.

Product Details

• Amazon Sales Rank: #193197 in Home Improvement
• Brand: CMT
• Model: 251.042.10
• Dimensions: .10" h x 10.00" w x 10.00" l, 2.00 pounds

Features

• For fast crosscuts on wood and plywood. Good rip cut on wood.
• To be used on radial arm saws, miter saws, table saws for cutting soft/hard wood and plywood.
• 0.098 kerf thickness, 0.071 plate thickness, 15° Hook Angle, 1 Flat + 2/15° alternate teeth Grind.
• Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products.
• Laser-cut plate features expansion slots to reduce noise and anti-vibration design.

CMT 225.096.12 Industrial Non-Ferrous Metal, PVC & Melamine Saw Blade, 12-Inch x 96 Teeth TCG Grind with 1-Inch Bore

Product Description

This low-noise saw blade is primarily intended for large panel saws and industrial woodworking machinery. High precision, tight tolerance and longer lifetime are only a few features this tool offers! In addition, this blade features a heavy-duty plate (46-48 Rockwell in hardness), chrome carbide cutting edges to guarantee extreme performance on steel pipes, steel rods, iron and sheet metals, anti-vibration design and expansion slots to reduce noise. The negative hook angle delivers a less aggressive and smoother cut. This tool is also produced by following precise procedures and techniques to confer greater value and allow for higher performance: tri-metal brazing, balancing and tensioning ring and laser-cutting for the steel plate. Try out the quality of the CMT blades!

Product Details

• Amazon Sales Rank: #383998 in Home Improvement
• Brand: CMT
• Model: 225.096.12
• Dimensions: .12" h x 12.00" w x 12.00" l, 2.00 pounds

Features

• For heavy-duty cutting, excellent on thin-walled, good on thick-walled extrusions.
• For radial arm saws, miter saws, table/special saws. Cut alu, brass,copper, PVC, non-ferrous metal.
• 0.122 kerf thickness, 0.098 plate thickness, -7° hook angle , Trapezoidal tooth Grind.
• Chrome carbide cutting edges guarantee great, long-lasting performance on non-ferrous metals, PVC.
• Anti-vibration design, expansion slots to reduce noise, tight tolerance, longer lifetime.

CMT 891.502.11 2-Piece Rail & Stile Bit Set, 1/2-Inch Shank, 1-3/4-Inch Diameter, Carbide-Tipped

Product Description

A well-constructed door must include a perfect rail and style joint. This is what this 2-piece bit set can offer! Clean, precise and well-crafted for strength, this is ideal for jobs requiring perfectly matching profiles. For routing on soft and hardwood from 23/32 to 7/8-Inch thick. Equipped with a bearing for easy template work, these bits feature super-strength superior steel body, Non-Stick Orange Shield Coating and cutting edges made of SinterHip Hi-Density Industrial Chrome Carbide for a long-lasting performance. To be used on router tables, not for hand-held routers.

Product Details

• Amazon Sales Rank: #210356 in Home Improvement
• Brand: CMT
• Model: 891.502.11
• Dimensions: 1.75" h x 1.75" w x 2.80" l, 1.00 pounds

Features

• Male & female bits for material from 23/32 to 7/8-Inch thick 2-51/64-Inch Overall Length
• Make rail and stile joints to buid your own doors Use on router tables only
• Clean, precise and well-crafted for strength Ideal for jobs requiring perfectly matching profiles
• 2 SinterHip Hi-Density Industrial Chrome Carbide cutting edges for long-lasting performance
• CMT bits were rated the best overall in comparison to other brand (Test by Wood Magazine)

CMT 855.503.11 Lock Miter Bit, 1/2-Inch Shank, 2-3/4-Inch Diameter, Carbide-Tipped

Product Description

This bit is ideal for milling miter joints in 1-1/8-Inch stock and it is also a quick and easy way to accurately create boxes, stretcher bars, frames and any assortment of right angle or parallel joint projects. Bit features super-strength superior steel body, Non-Stick Orange Shield Coating and cutting edges made of SinterHip Hi-Density Industrial Chrome Carbide for a long-lasting performance. Not for use on hand-held router. Use it on router tables only. After a test performed by Wood Magazine, CMT orange bits have been rated the first overall router bits compared to other brands.

Product Details

• Amazon Sales Rank: #143243 in Home Improvement
• Brand: CMT
• Model: 855.503.11
• Dimensions: 2.00" h x 2.00" w x 2.00" l, 1.00 pounds

Features

• 1-1/4-inch Cutting Length, 45°Cutting Angle, Material 5/8 to 1-1/8-Inch thick, 2-49/64-Inch Length
• Create boxes, stretcher bars, frames and any assortment of right angle or parallel joint projects
• ideal for milling miter joints in 1-1/8-Inch stock Use on router tables only
• Non-Stick Orange Shield Coating, Anti-Kickback Design, Equipped with Bearing
• 2 SinterHip Hi-Density Industrial Chrome Carbide cutting edges for long-lasting performance

CMT 855.501.11 Reverse Glue Joint Bit, 1/2-Inch Shank, 1-3/4-Inch Diameter, Carbide-Tipped

Product Description

This bit produces an almost indestructible glue joint quickly and accurately. Ideal for joining wide panels, doors and furniture parts. By accurately centering the bit in the wood, the upper and lower vertical cutting edges of the bit will cut equal proportions. Simply run one edge of the panel, turn the panel over, and then run the opposite edge - you will produce perfectly matched reverse cuts that form flawless joints. This tool features super-strength superior steel body, Non-Stick Orange Shield Coating and cutting edges made of SinterHip Hi-Density Industrial Chrome Carbide for a long-lasting performance. Not for use on hand-held routers. Use on router tables only. After a test performed by Wood Magazine, CMT orange bits have been rated the first overall router bits compared to other brands.

Product Details

• Amazon Sales Rank: #205176 in Home Improvement
• Brand: CMT
• Model: 855.501.11
• Dimensions: 1.75" h x 1.75" w x 3.14" l, 1.00 pounds

Features

• 1-1/4-Inch Cutting Length, Material Thickness from 19/32 to 1-3/16-Inch, 2-49/64-Inch Length
• Create an almost indestructible glue joint quickly and accurately
• Ideal for joining wide panels, doors and furniture parts Not for use on hand-held routers
• Non-Stick Orange Shield Coating, Anti-Kickback Design, Equipped with Bearing
• 2 SinterHip Hi-Density Industrial Chrome Carbide cutting edges for long-lasting performance

CMT 835.502.11 Rabbeting Set, 1/2-Inch Shank, Carbide-Tipped

Product Description

Get seven different rabbets in one single bit! This set includes a 1/4-Inch Shank Rabbeting bit and 7 different bearing to create seven different rabbets. Hex key included! The bit features 2 carbide-tipped cutting edges to produce excellent long-lasting results on wood and wood composites, thanks to the SinterHip Hi-Density Industrial Chrome Carbide. The bit body is made of super-strength steel for better endurance and anti-kickback design to control the depth of cut. The rabbets you can make vary in size: 1/8-Inch, 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch and 1/2-Inch. After a test performed by Wood Magazine, CMT orange bits have been rated the first overall router bits compared to other brands.

Product Details

• Amazon Sales Rank: #80247 in Home Improvement
• Brand: CMT
• Model: 835.502.11
• Dimensions: 2.00" h x 2.00" w x 6.00" l, 1.00 pounds

Features

• Cutting depth 1/8 to 1/2-Inch by replacing bearing, 1-3/8-Inch Diameter & 3/4-Inch Cutting Length
• For rabbeting of different size on wood and wood composites
• Anti-kickback design
• 2 SinterHip Hi-Density Industrial Chrome Carbide for long-lasting performance
• Bit, bearings and hex key are included

CMT 191.506.11 1/2-Inch Diameter, 1-1/2-Inch Cut, 1/2-Inch Shank Upcut Spiral Router Bit

Product Description

The CMT 191.506.11 is a 1/2-Inch Upcut Spiral Bit. Our new high performance solid carbide spirals are engineered for faster feed rates and long cutting life. New super micrograin carbide formula offers extremely sharp and longer lasting cutting edges. Low helical grind shears material with more efficient chip ejection. The tool works less, runs cooler and out performs the competition. Our new precision machinery was designed and built to CMT spec's. We now manufacture solid carbide spirals with the tightest tolerances in the industry. You won't find a better performance in tooling.   Features: Cut Diameter: 1/2-Inch Cut Length: 1 1/2-Inch Shank Diameter: 1/2-Inch What's In the Box: CMT 191.506.11 1/2-Inch Upcut Spiral Bit

Product Details

• Amazon Sales Rank: #210015 in Home Improvement
• Brand: CMT
• Model: 191.506.11
• Dimensions: 2.00" h x 2.00" w x 5.00" l, 2.00 pounds

Features

• Solid carbide up cut 2-edge spiral router bit provide fast upward chip ejection and deliver the finest finish on the lower surface of the work piece
• Used for cutting, copying, panel sizing and any routing applications on solid wood, wood composites, plastic materials and laminates
• Special super-micro grain carbide formulation to produce and hold keen cutting edges
• For use on machining centers, point to point machines, cnc routers and hand-held routers equipped with chucks or adaptors
• Features right-hand rotation, 1/2-Inch diameter, 1-1/2-Inch cut, 1/2-Inch shank, 3-1/2-Inch length
• Features right-hand rotation, 1/2 diameter, 1-1/2 cut, 1/2 shank, 3-1/2 length in inches
• For use on machining centre's, point to point machines, CNC routers and hand-held routers equipped
• Solid carbide upcut 2-edge spiral router bit provide fast upward chip ejection
• Special super-micrograin carbide formulation to produce and hold keen cutting edges
• Used for cutting, copying, panel sizing and any routing applications on solid wood, wood composites

CMT 191.503.11 Solid Carbide Upcut Spiral Bit, 3/8-Inch Diameter by 3-Inch Length, 1/2-Inch Shank

Product Description

Sharp technology with a new twist! This upcut spiral bit is made of a special super-micrograin carbide formula which makes the cutting edges very sharp. The new low-angle spiral is designed to shear wood cleanly and provide excellent chip ejection. As a result, the tool will run cooler and the cutting edges will last longer The spiral bit produces an excellent finish on both the lower side of your workpiece. Excellent cutting results and enhanced productivity.

Product Details

• Amazon Sales Rank: #57130 in Home Improvement
• Brand: CMT
• Model: 191.503.11
• Dimensions: .25" h x .25" w x 2.50" l, 2.00 pounds

Features

• 1-1/4-Inch Cutting Length, 2 Cutting Edges, Right-Hand Rotation
• Premium Quality Solid Carbide, Excellent finish on the workpiece lower side Upward chip ejection
• For cutting, copying, sizing and routing wood products, plastic & laminates
• For use on machining centers, point to point machines, CNC routers
• Also for use on hand-held routers equipped with chucks or adaptors